The equipment adopts dry crushing and crushing to make the waste circuit board become a mixture of metal and resin fiber powder, and then separate the metal from the non-metal such as resin through a wind pressure separator. Advantages of the equipment, low noise, no water, no dust pollution, saving power, saving manpower, no waste, more than 95% of metal and non-metals are fully recycled. In order to prevent dust pollution during processing, the equipment adopts a three-in-one dust removal device. The dust removal device has three levels of dust removal: cyclone dust removal and two-level bag dust removal, which effectively solves the problem of dust pollution. All indicators meet national standards.
1. Power supply: three-phase AC 380V / 50Hz, 200KVA.
2. Iron recovery (% by weight): ≥ 95%
3. Copper recovery rate (% by weight): ≥ 95%
4. Epoxy resin recovery rate (% by weight): ≥ 95%
5. Noise, dust leakage and exhaust emissions comply with relevant national standards and requirements.
6. Site requirements: The height of the factory building is greater than 7 meters; the width of the factory door is greater than 4 meters and the height is greater than 5 meters; the bearing capacity is greater than 10 tons.
7. Equipment appearance and color: according to enterprise standards.