A device for recovering refrigerant is used for recovering refrigerant in refrigeration machinery (refrigerators such as refrigerators, air conditioners, and freezers). At the same time of recycling, a certain treatment is performed on the refrigerant, such as drying, filtering of impurities, oil content, etc., so as to facilitate the secondary use of the refrigerant.
1) is a portable large-capacity air-conditioning refrigerant recovery equipment, suitable for the recovery of gaseous and liquid refrigerants (refrigerants);
2) With complete high and low voltage display and high and low voltage protection system, disconnect the high voltage switch and control indicator;
3) High-efficiency drying filter and refrigerant purification device can effectively remove moisture, impurities, and easy and fast maintenance;
4) Oil-free compressors run smoothly, low vibration and easy to operate. The main liquid / compatible valve system is easy to start under high pressure. ;
The compressor uses the compressor to recover the refrigerant of the refrigeration system into the equipment to filter, dry, and separate the lubricating oil, compresses it into a gaseous refrigerant, enters the condenser to cool it into a liquid, and stores it in a working tank, waiting for reuse. This not only protects the environment, but also increases economic benefits.
Note: Do not use work tanks that have not been specifically approved, and do not recycle refrigerant to non-refill tanks. You must read the manual in detail before operation, and strictly follow the operation steps. The user must bear full responsibility for the loss of personnel and equipment caused by violation of the operating regulations.
|Applicable refrigerant||R12, R22, R502|
|Applicable voltage||220V ~ 50HZ|
|Recovery of compressor power||3 / 4HP|
|Average recovery speed (room temperature)||Liquid: 50kg / H Gas: 25kg / H|
|Working tank configuration||2|
|Working tank capacity||15kg / piece|
|Overall dimensions (mm)||700 * 600 * 1050|