The equipment adopts dry crushing and crushing to make the waste circuit board become a mixture of metal and resin fiber powder, and then separate the metal from the non-metal such as resin through a high-voltage electrostatic separator. Advantages of equipment, low noise, no water, no dust pollution, saving power, saving manpower, no waste, 99% of metal and non-metals are fully recycled. In order to prevent dust pollution during processing, the equipment adopts a three-in-one dust removal device. The dust removal device has three levels of dust removal: cyclone dust removal, bag dust removal, and air purifier dust removal, which effectively solves the problem of dust pollution. All indicators meet national standards. .
No water needed
3. No dust pollution
4. High metal recovery rate
5. Save power and manpower
6. No waste, 99% of metals and non-metals are fully recycled.
|model||Capacity (KG / H)||Total power of complete production line (KW)||Sorting efficiency||Equipment size (L * W * H) MM|
|Electrostatic sorting||800-1000||≤180kw||≥99%||18000 * 8000 * 4500|
|Wind selection||300-500||≤68kw||≥98%||12000 * 6000 * 4500|