The flotation machine is suitable for the selection of non-ferrous metals and non-metals such as coal fluorite and talc. The flotation machine is driven by the triangle drive of the motor to rotate the impeller to generate centrifugal action to form negative pressure. On the one hand, sufficient air is mixed with the pulp, on the one hand, the pulp is mixed with the medicine, and the foam is refined to make the mineral adhere to the foam Floating to the surface of the pulp and forming mineralized foam. Adjust the height of the shutter and control the liquid level so that useful foam is scraped out by the scraper.
The ground ore is added with water and necessary medicaments during grinding or after grinding to a slurry through a mixing tank, and then injected into the slurry tank where the stirring is started, and air is introduced into the slurry to form a large number of bubbles, some of which are not easily affected by water. Wet, that is, generally known as hydrophobic mineral particles adhere to the bubbles, and float with the bubbles on the surface of the pulp to form a layer of mineralized bubbles. Others are easily wetted by water, which is generally called hydrophilic mineral particles It does not adhere to the air bubbles, but stays in the ore pulp to discharge the mineralized air bubbles containing specific minerals, thereby achieving the purpose of beneficiation.
Low operating costs
Compared with the conventional mechanical stirring flotation machine, it can save power by 1/3 ~ 1/2.
High sorting accuracy and low ash content
The clean coal ash content can be reduced by 1 ~ 2% compared with the conventional mechanical stirring flotation machine.
Flotation effect is good
Equipped with liquid level automatic control and electric control device, the foam is highly refined, thereby improving the flotation effect.
Consumables are durable
The impeller is always active in the machine, which plays a role in removing accumulated materials and debris, reducing the phenomenon of damage to parts due to debris; and the impeller of the stirring device is made of ground rubber to enhance wear resistance.
|category||Specifications||Effective volume (m³)||Processing capacity (m³ / min)||Spindle scraper||Tank size (length × width × height) (mm)||Single tank weight (kg)|
|Power (kw)||Speed (r / min)||Speed (r / min)||Power (kw)|
|XJK Flotation Machine||XJK-0.35||0.35||0.18-0.4||1.5||483||25||1.1||700 × 700 × 700||460|
|XJK-0.62||0.62||0.3-0.9||3.0||400||25||1.1||900 × 820 × 850||980|
|XJK-1.1||1.1||0.6-1.6||5.5||330||25||1.1||1100 × 1100 × 1000||1390|
|XJK-2.8||2.8||1.5-3.5||11||280||25||1.1||1750 × 1600 × 1100||2430|
|XJK-5.8||5.8||5-7||twenty two||240||25||1.5||2200 × 2200 × 1200||3533|
|SF flotation machine||SF-0.37||0.37||0.2-0.4||1.5||386||25||1.1||700 × 700 × 750||468|
|SF-0.7||0.7||0.3-0.9||3||400||25||1.1||900 × 820 × 950||990|
|SF-1.2||1.2||0.6-1.6||5.5||330||25||1.1||1100 × 1100 × 1100||1873|
|SF-2.8||2.8||1.5-3.5||11||268||25||1.1||1750 × 1600 × 1150||2538|
|SF-4||4||2-4||15||220||25||1.5||1850 × 2050 × 1200||2838|
|SF-8||8||4-8||30||191||25||1.5||2200 × 2900 × 1400||4129|
|SF-10||10||5-10||30||191||25||1.5||2200 × 2900 × 1700||4486|
|SF-20||20||5-20||30 × 2||191||25||1.5||2850 × 3800 × 2000||9828|
|JJF flotation machine||JJF-2||2||1-3||7.5||443||25||1.5||1400 × 1400 × 1100||1670|
|JJF-4||4||2-4||11||305||25||1.5||1600 × 2150 × 1250||2350|
|JJF-8||8||4-8||twenty two||233||25||1.5||2200 × 2900 × 1400||4500|
|JJF-10||10||5-10||twenty two||233||25||1.5||2200 × 2900 × 1700||4820|
|JJF-16||16||5-16||30||180||25||1.5||2850 × 3800 × 1700||8000|
|JJF-20||20||5-20||37||180||25||1.5||2850 × 3800 × 2000||10500|