Introduction The traditional 6-S shaker has a large floor area, low processing capacity, and large customer capital investment. Customers who use a 6-S single-layer shaker are very troubled, but there is no better equipment and method to solve these problems. problem. The introduction of 6-S multi-layer shaker solves the use of 6-S single-layer shaker
Introduction The glass fiber reinforced plastic spiral chute is based on the fixed spiral chute and the groove body is rotated. The equipment structure is shown in the figure below. The spiral groove body is made of aluminum alloy, and has a double layer (head), which is driven by the lower transmission mechanism to slowly rotate in the direction of the slurry flow. Trough section
Equipment Use Mini mobile sorting machine is suitable for the separation of fine and particulate rare metals, ferrous metals, non-ferrous metals, precious metals and other mines and coal. Not only can it be used as an independent beneficiation operation, it can also be used with jig, spiral beneficiation, and centrifugal beneficiation.
Introduction This kind of shaker is also called a Guiyang-style shaker, which is similar in structure to a foreign Plat-O shaker in structure. There is a wide range of differential adjustment to adapt to different feeding granularity and selection requirements.
Introduction Shaker is one of the main equipments of gravity beneficiation. It is widely used in the separation of tungsten, tin, tantalum, niobium, gold and other rare and precious metals. Can be used for different operations such as coarse selection, selection, sweeping, etc. Selecting coarse sand (2-0.5mm), fine sand (0.5-0.074mm), slime (-0.0
A heavy separation device that uses the inertia centrifugal force generated by the pulp in the spiral rotary motion to realize the separation of light and heavy minerals. Stable, easy to control, and wide concentration range. The material processing capacity is large, the enrichment ratio is high, and the recovery rate is high. Small footprint, low water consumption, and simple structure
The sawtooth wave jig is suitable for processing coarse and medium grain ore. The grain size is 50mm on the line, the lower limit is 0.2-0.074mm, preferably 2-18mm. Sawtooth wave jig is often used for processing coal mine, tungsten mine, tin mine, gold mine, iron mine, manganese mine, etc. Sawtooth wave jig is a heavy beneficiation equipment.